Kyocera Copystar CS 3011i Service Manual page 368

(14) Offset occurs.
Print example
Deformed or worn cleaning
blade in the drum unit.
Defective discharger lamp.
Defective fuser unit.
Wrong types of paper.
(15) Part of image is missing.
Print example
Paper damp.
Paper creased.
Drum condensation.
Dirty or flawed drum.
Dirty transfer roller.
(16) Fusing is loose.
Print example
Wrong types of paper.
Flawed heat roller or press
roller.
Defective pressure springs.
Defective fuser heater.
(17) Image is out of focus.
Print example
Defective image scanning
unit.
Drum condensation.
Causes
Replace the drum unit (see page 1-5-21).
Clean the discharger lamp. Or replace the drum unit.
Replace the fuser unit (see page 1-5-25).
Check if the paper meets specifications. Replace paper.
Causes
Check the paper storage conditions.
Replace the paper.
Perform the drum refresh operation.
Perform the drum refresh operation.
Flawed drum. Replace the drum unit (see page 1-5-21).
Clean the transfer roller. Replace the transfer roller if it is
extremely dirty (see page 1-5-24).
Causes
Check if the paper meets specifications, replace paper.
Replace the fuser unit (see page 1-5-25).
Causes
Replace the image scanning unit (see page 1-5-34).
Perform the drum refresh operation.
Check procedures/corrective measures
Check procedures/corrective measures
Check procedures/corrective measures
Check procedures/corrective measures
1-4-75
2RG/2RH