Kyocera Copystar CS 3011i Service Manual page 36

The change of Cassette heater switch
1. Remove the cover of the cassette
heater switch.
2. Change the cassette heater switch.
* In case of only using the cassette
heater switch, switch ON.
3. Attach the removed switch cover.
* : In case of changing the switch, execute the maintenance mode U0327 after inputing the power source.
Input "10871087" using the numeric keys and set the maintenance mode.
Input "327" using the numeric keys and press the [Start] key.
Select [On] or [Off] and press the [Start] key.
Press the [Stop] key.
Precaution for Loading Paper
If paper is left in the cassette for a long period, heat from the cassette heater may discolor it.
The other optional equipment
1. In case of installing the other optional equipment (finisher, fax kit, etc), install respectively.
Switch cover
1-2-9
Cassette heater switch
Figure 1-2-13
2RG/2RH