Kyocera Copystar CS 3011i Service Manual page 156

U150 Check Toner Sensor Operation
(Message: Check Toner Sensor Operation)
Contents
Display the ON/OFF status each switch sensor status in relation to the toner.
Purpose
Execute to check if each switch sensor is operating correctly.
Setting
1.Press the [Start] key.
2.Check the ON/OFF status of switch sensor.
*: The display of applicable switch sensor becomes "1" when the switch "ON" is detected.
Container Set
Container Sensor
Waste Box Sensor
Motor
3.To stop the motor drive, press the [Stop] key.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
U157 Developer drive time
(Message: Developing Unit Drive Time)
Contents
Displays the developer drive time to be a reference for the toner density control correction.
Purpose
Execute to check the developer drive time since replacing the developer unit.
Method
1.Press the [Start] key.
*: Displays the developer drive time.
K
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Items
Display the switch status of toner container set
Display the status of toner sensor
Display the status of waster toner sensor
Drive the main motor.
Items
Display the developer drive time
Contents
Contents
1-3-73
2RG/2RH