Hook-And-Loop Fastener - Kyocera Copystar CS 3011i Service Manual

15. Put two hooks and the protrusion together and attach the upper cover to the lower keyboard mounting
bracket.
16. Fix the upper cover to the lower keyboard mounting bracket by using the one screw.
Upper cover
Lower keyboard
mounting bracket
17. Affix a pair of two hook-and-loop fasteners to the concave of the upper keyboard cover.
hook-and-loop
fasteners
upper keyboard cover
18. Place the keyboard on the hook-and-loop fastener and press it to fix.
19. Connect the USB cable with the USB connector on the main unit.
20. Reattach the removed card reader cover and the below operation panel cover in the original position.
Screw
Figure 1-2-49
Concave
Figure 1-2-50
Keyboard
hook-and-loop fasteners
Figure 1-2-51
1-2-34
Hooks
USB cable
USB connector
2RG/2RH
Protrusion