Kyocera Copystar CS 3011i Service Manual page 502

(3) Others
14
1. Paper feed clutch 1 (PFCL1) ................ Controls the primary paper feed from cassette 1.
2. Paper feed clutch 2 (PFCL2) ................ Controls the primary paper feed from cassette 2.
3. Registration clutch (RCL)...................... Controls the secondary paper feed.
4. Duplex clutch (DUCL) ........................... Controls the drive of the duplex feed roller.
5. Mid clutch (MCL)................................... Controls the paper conveying.
6. MP solenoid (MPSOL) .......................... Controls the MP bottom plate.
7. Feedshift solenoid (FSSOL).................. Operates the feedshift guide.
8. Cleaning lamp (CL) ............................... Eliminates the residual electrostatic charge on the drum.
9. Fuser heater 1 (FH1) ............................ Heats the heat roller.
10. Fuser heater 2 (FH2) ............................ Heats the heat roller.
11. Fuser thermostat 1 (FTS1).................... Prevents overheating of the heat roller.
12. Fuser thermostat 2 (FTS2).................... Prevents overheating of the heat roller.
Machine front
Figure 2-2-4 Others
8
13
Machine inner
2-2-6
15
7
11,12
9,10
4
6
1
3
2
5
Machine rear
2RG/2RH