Kyocera Copystar CS 3011i Service Manual page 206

U402 Adjusting the printing margins
(Message: Adjust Print Margin)
Contents
Adjusts the scan image margins.
Purpose
Make the adjustment if margins are incorrect
*: If the leading edge margin is less than the specified value, it may cause jam at the fuser.
*: If there is no bottom margin, when continuously printing, it may cause an image smudge on the second
page.
Adjustment
1.Press the [Start] key.
2.Press the [System Menu] key.
3.Press the [Start] key to output a test pattern.
4.Press the [System Menu] key.
5.Select the item to set.
Items
Lead
A Margin
C Margin
Trail
6.By using the [+] [-] keys or the numeric keys, change the setting value.
*: When the setting value is increased, the margin widens, and it narrows when the setting value is
decreased.
7.Press the [Start] key to set the setting value.
Precautions
Appropriate margins are not obtained after this adjustment, execute the following maintenance mode.
U034(P.1-3-36) > U402
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Contents
Adjusts the printer leading edge margin
Printer left margin
Printer right margin
Printer trailing edge margin
Printer leading edge margin
(4.0 +1.5/-0 mm)
Printer
left margin
(2.5 +1.5/-2.0 mm)
Printer trailing edge margin
(2.5 +1.0/-1.0 mm)
Figure 3-17
Printer
right margin
(2.5 +1.5/-2.0 mm)
1-3-123
Setting range Initial
setting
0.0 to 10.0 4.0
0.0 to 10.0 3.0
0.0 to 10.0 3.0
0.0 to 10.0 3.9
2RG/2RH
Data
varia-
tion
0.1 mm
0.1 mm
0.1 mm
0.1 mm