Kyocera Copystar CS 3011i Service Manual page 143

U099 Original size detection setting
(Message: Set Original Size Detection)
Description
Sets the original size detection check and detection threshold
Purpose
Changes the detection threshold if the original size is often mis-detected with entirely dark originals (high
density) or dark originals at edges only
Changes the detection threshold.
Setting
1.Press the [Start] key.
2.Select the item to set.
*: The screen for setting is displayed.
Data1
B/W Level1
Data2
Execution: Data1/Data2
1.Place an original copy on the table and close the original copy cover or document processor.
2.The light source is turned on and the CCD sensor detects the original width. The original size sensor
detects the original lengthwise. (Detected twice when the document processor is installed)
Original Area(dot)
Original Area(mm)
Size SW L
Items
Display of the original width of RGB each three color
Original size detection threshold setting
Display of the original copies width of RGB each three color (when the
document processor is installed)
Items
Detected number of pixels (dot) in the original width
Detected number of pixels (mm) in the original width
Indicating ON/OFF of the original length sensor (0: Off/1: On)
Contents
Contents
1-3-60
2RG/2RH