Kyocera Copystar CS 3011i Service Manual page 251

U632 Communication control procedures 3
(Message: Communication Control 3)
Contents
Sets the FAX communication.
Purpose
Reducing the error communication when using a low quality line
Corresponds to field claims when automatic FAX/telephone switching
Method
1.Press the [Start] key.
1.Select the item to set.
*: The screen for setting is displayed.
DIS 4Byte
Num OF CNG(F/T)
Setting: DIS 4Byte
Sets whether to send bit 33 and later bits of the DIS/DTC signal.
1.Select the item to set.
On
Off
*: Initial setting: Off
2.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Setting: Num OF CNG(F/T)
Sets the CNG detection times in the automatic FAX/telephone switching mode.
1.Select the item to set.
1Time
2Time
*: Initial setting: 1Time (100V model)/2Time (Others)
2.Press the [Start] key to set the setting value.
*: [Completed] is displayed.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Items
Sets the DIS signal to 4 bytes.
Sets the number of the CNG detection in the automatic FAX/telephone
switching mode.
Items
Bit 33 and later bits of the DIS/DTC signal are not sent.
Bit 33 and later bits of the DIS/DTC signal are sent.
Items
Detects CNG once.
Detects CNG twice.
Contents
Contents
Contents
1-3-168
2RG/2RH