Kyocera Copystar CS 3011i Service Manual page 169

*: Value of 0 allows non-restricted copying. (At a periodic maintenance, etc.)
4.Press the [Start] key to set the setting value.
Setting: Apl
1.Select the item to set.
2.By using the [+] [-] keys or the numeric keys, change the charger setting value.
Items
Apl1
Apl2
Apl3
Apl4
Apl5
3.Press the [Start] key to set the setting value.
Setting: Boot Mode
1.Select the item to set.
Items
Normal
Copy Service
*: Initial setting: Copy Service
2.Press the [Start] key to set the setting value.
3.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Setting: Apl Charge Mode
1.Select the item to set.
Items
On
Off
*: Initial setting: Off
2.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Contents
Expanded charging unit 1
Expanded charging unit price 2
Expanded charging unit price 3
Expanded charging unit price 4
Expanded charging unit price 5
Assign activation to normal mode
Assign activation to copy service display
The extended charge unit is used.
The extended charge unit is not used.
1-3-86
Setting range
0 to 300
0 to 300
0 to 300
0 to 300
0 to 300
Contents
Contents
2RG/2RH
Initial setting
10
10
10
10
10