Kyocera Copystar CS 3011i Service Manual page 221

U425 Set Target
(Message: Set Target Adjustment Value)
Description
Enter the Lab values which are shown on the back page of the adjustment original (P/N: 7505000005).
Purpose
Enter data in order to correct for differences in originals during the automatic adjustment
Execution
1.Press the [Start] key.
2.Select the item to set.
ChartA
ChartB
Method: ChartA
1.Press the [Start] key.
2.Select the item to set.
White
Black
Gray1
Gray2
Gray3
C
M
Y
R
G
B
Adjust Original
Setting: White
1.Select the item to set.
2.By using [Left/Right cursor] keys or the numeric keys, enter the values which are shown on the back page
of the adjustment original.
Items
L
a
b
3.Press the [Start] key to set the setting value.
Items
Setting the adjustment value of the table scanning
Sets the adjustment value of the DP scanning
Items
Setting the white patch for the adjustment original
Setting the black patch for the adjustment original
Setting the Gray1 patch for the adjustment original
Setting the Gray2 patch for the adjustment original
Setting the Gray3 patch for the adjustment original
Setting the cyan patch for the adjustment original
Setting the magenta patch for the adjustment original
Setting the yellow patch for the adjustment original
Setting the red patch for the adjustment original
Setting the green patch for the adjustment original
Setting the blue patch for the adjustment original
Setting the main scanning and sub-scanning directions
Contents
L parameter setting
A value setting
B value setting
Contents
Contents
Setting range
0.0 to 100
-200 to 200
-200 to 200
1-3-138
2RG/2RH
Initial Data
setting variation
93.6 -
0.9 -
-0.4 -