Kyocera Copystar CS 3011i Service Manual page 131

U067 Adjusting the table scanning center line
(Message: Adjust Table Center)
Contents
Adjusts the center line for the table scanning.
Purpose
Adjusted if there is a regular error between the center lines of the copy image and original.
Adjustment
1.Press the [Start] key.
2.Press the [System Menu] key.
3.Place an original and press the [Start] key to make a test copy.
4.Press the [System Menu] key.
Items
Front
1.By using the [+] [-] keys or the numeric keys, change the setting value.
For the copy example 1, increase the setting value.
For the copy example 2, decrease the setting value.
*: When the setting value is increased, the image moves to right, and it moves to left when the setting
value is decreased.
2.Press the [Start] key to set the setting value.
Precautions
Check the copy image after the adjustment. If the image is still incorrect, adjust the following in the mainte-
nance mode.
U034(P.1-3-36) > U065(P.1-3-45) > U067
Completion
Press the [Stop] key.
*: The screen for selecting a maintenance item No. is displayed.
Contents
Adjusts the scanner center line
Center line of the copy image (within ± 2.0 mm)
Original Copy
example 1
Figure 3-11
1-3-48
Setting range
-60 to 60
Copy
example 2
2RG/2RH
Initial Data
setting variation
0 0.085
mm