Kyocera Copystar CS 3011i Service Manual page 185

Setting: Punch Regist
1.Select [Punch Regist].
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Adjusting the punch registration stop timing
*: Increase the value if paper is skewed (sample 1).
Reduce the set value if paper is folded in a Z-shape (sample2).
3.Press the [Start] key to set the setting value.
Setting: Punch Feed
1.Select [Punch Feed].
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Adjusting the punch stop timing
*: Increase the specified value if the punch position is shorter than specified.
Reduce the specified value if the punch position is longer than specified.
A
3.Press the [Start] key to set the setting value.
Setting: Punch Width
1.Select [Punch Width].
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Punch center position timing adjustment
Content to adjust
Sample 1 Sample 2
Content to adjust
Content to adjust
1-3-102
Setting Initial setting
range
-20 to 20
Setting Initial setting
range
-10 to 10
Preset value A: 13 mm (metric)
9.5 mm (inch)
Setting Initial setting
range
-4 to 4
2RG/2RH
Data varia-
tion
0 0 to 25 mm
Data varia-
tion
0 0.52mm
Data varia-
tion
0 0.52 mm