Next steps
If necessary, configure additional extensions and users.
Configuring the static IP parameters for the base station
If the base station IP address is statically assigned, you must configure IP Office with the
address of the base station.
Procedure
1. In IP Office Manager, open the Line menu for the desired IP Office control unit and
2. In the SIP DECT Line window, enable the Configure Base IP settings and uncheck
3. Configure the parameters for IP Address, IP Mask, IP Gateway, and Provisioning
4. Select the appropriate server from the Provisioning Server drop down menu.
D100 SIP Wireless Terminal Installation and Administration Guide
select the SIP DECT line dedicated to the base station.
the DHCP Client checkbox.
Server.
Configuring the D100 using IP Office Manager
December 2012
25