Siemens SINAMICS S120 Function Manual page 915

No. Software function
14 Support of new components S120M
Safety Integrated Functions
15 Safety Integrated Extended Functions with two TTL/HTL encoders
16 Safety: Safe Brake Test
17 Safety Info Channel
Table A-30 New functions, firmware 4.7
No. Software function
1 Separately excited synchronous machine: New operating mode,
only with HTL encoder and VSM
2 S120 Combi support
3 Identification & Maintenance data sets (I&M 0...4) support
4 Isochronous reduction for IRT devices
5 Dynamic IP address assignment (DHCP) and temporary device
names for PROFINET
6 Fast flying restart with voltage measurement
7 One button tuning
8 Online tuning
9 Adaptive current setpoint filter for online tuning
10 Independent setting of the pulse frequency and the PROFIBUS and
PROFINET cycles
11 PROFIenergy for SINAMICS S120
12 Activation of network functionality for booksize modules for renew‐
able energies
13 New mode for ramp-function generator tracking with torque, power
or current limit
Safety Integrated Functions
14 Parameterizable line contactor activation for STO
15 Extension of the safe gearbox switchover
16 Execute test stop automatically during ramp-up
17 Safety Integrated Extended Functions with two TTL/HTL encoders
for booksize and blocksize
18 Uniform behavior for component replacement
19 SINAMICS S120 hydraulic drive with Safety Integrated
Table A-31 New functions, firmware 4.8
No. Software function
1 Synchronous reluctance motors
2 Moment of inertia precontrol of the moment of inertia estimator
3 Expansion of the thermal motor models
4 Communication via MODBUS TCP
Drive functions
Function Manual, 06/2019, 6SL3097-5AB00-0BP2
A.7 Availability of SW functions
SERVO VECTOR Hardware component
x - -
x x -
x x -
x x -
SERVO VECTOR Hardware component
- x -
x - New power unit:
6SL3111-4VE21-0EA
x x -
- x -
x x -
x x -
x - -
x - -
x - -
x x -
x x -
x x -
- x -
x x -
x x -
x x -
x x -
x x -
x - -
SERVO VECTOR Hardware component
‑ x ‑
‑ x ‑
x x ‑
x x ‑
Appendix
913