Siemens SINAMICS S120 Function Manual page 741

Hide thumbs Also See for SINAMICS S120:

Table of Contents

1. Click in the "Drive objects and components" display area on the "Components" tab.

Then, the information and messages regarding the components are displayed in a list.

Figure 13-18

2. In order to carry out an LED flash test for individual components, click on

corresponding line.

The ready LED on the corresponding component then begins to flash.

3. If needed, you can re-sort the individual columns by clicking on the corresponding column

head (e.g. Type).

You can view the entries in ascending

Re-sorting the entries in a list affects only the list currently being shown. Re-sorting has no

effect on other lists.

A red or orange marking indicates a DRIVE-CLiQ wiring error on a component. Switch to the

"Topology" tab in order to view further information.

Displaying DRIVE-CLiQ wiring errors

In order to view existing DRIVE-CLiQ wiring errors and diagnostic information about the

individual components of your drive, proceed as follows:

Drive functions

Function Manual, 06/2019, 6SL3097-5AB00-0BP2

Example: "Components" display area

13.3 Diagnostic functions

or descending