Lift Platform Replacement
About
This procedure provides instruction to remove and replace the Lift Platform.
Procedure
Removal Instructions
Review entire procedure before starting.
1. Remove the hood cover, see
2. Remove the left/right trim landing covers, see
page 63.
3. Remove the left and right trim side covers see
page 58.
4. You can access and remove the lift platform from the front of the treadmill or by laying
the treadmill on its side. This procedure uses the front access method. If you do not
have supports available, then use the alternative side access method, see
form assembly access" on page 53
"Hood Cover Replacement" on
"Trim Landing Covers Replacement" on
"Covers and Panels Replacement" on
procedure.
5 Replacement Procedures
Lift Platform Replacement
page 60.
"Side lift plat-
Page 146