4. Increase the speed to 6 mph (10 kph) verify tracking, then increase the speed to 9 mph
(14 kph) verify tracking, and finally increase the speed to 12 mph (19 kph) and verify
tracking. Make sure that the tracking remains centered at each speed, make small
adjustments as needed.
5. Make sure that the treadmill is setting level and stable, adjust the two rear leveling feet
as necessary.
Note: An unlevel unstable treadmill can cause tracking issues with use.
6. Replace the hood and left/right trim landing covers, see
ment" on
page 58.
7. Verify treadmill operation (see
vice.
Running Belt Tension and Tracking Adjustment
"Operation Verification" on
4 Adjustment Procedures
"Covers and Panels Replace-
page 16) and return to ser-
Page 48