Dash Back Cover Replacement - Precor Experience 700 line Series Service Manual

Dash Back Cover Replacement

Dash Back Cover Replacement
ID
Dash Back Cover
Dash Front Cover
Removal Instructions
1. Remove the back cover
ers first and then the remaining four top screws. Carefully hold the cover from falling
while removing the fasteners. Retain fastener hardware for installation.
Installation Instructions
1. Reinstall and hold the back cover
screws first followed by the remaining three bottom screws. Fully tighten all fasteners.
Description
. Start by removing the bottom three #3 Phillips screw fasten-
into position. Then install the top four #3 Phillips
5 Replacement Procedures
Covers and Panels Replacement
Page 70