TIP:Avoid applying downward pressure on the bolts while removing. Pressing down
on the bolts can push the nuts out of the pivot housing .reinstall the nut into the pivot
housing if this occurs.
6. Remove the two 5/32" hex key bolt front deck fasteners. These fasteners are attached
to the left and right front
installation.
1
Ground Effects Impact Control System: Patented treadmill design that out performs a natural
running surface, absorbs high-impact movement, reduces joint stress and minimizes fatigue
and supports a solid and controlled push off.
1
GFX
Cushion tinnerman clips. Retain fastener hardware for
5 Replacement Procedures
Running Belt and Deck Replacement Procedure
Page 130