Precor Experience 700 line Series Service Manual page 157

9. Remove right lift platform pivot hitch pin. Remove left lift platform pivot hitch pin and
spacer. Carefully push the right and left clevis pins outward enough to allow the lift plat-
form to be removed. Retain fastener hardware for installation.
Installation Instructions
1. Install the lift platform left and right pivot brackets into position and insert the right and
left clevis pins. Add the spacer to the left clevis pin and secure using the hitch pin.
Secure the right clevis pin with the hitch pin.
5 Replacement Procedures
Lift Platform Replacement
Page 149