Lift Platform Replacement; About; Procedure - Precor TRM700-16 Base Service Manual

Lift Platform Replacement

About

This procedure provides instruction to remove and replace the Lift Platform.

Procedure

Removal Instructions
Review entire procedure before starting.
1. Remove the hood cover, see
2. Remove the left/right trim landing covers, see
page 59.
3. Remove the left and right trim side covers see
page 54.
4. You can access and remove the lift platform from the front of the treadmill or by laying
the treadmill on its side. This procedure uses the front access method. If you do not
have supports available, then use the alternative side access method, see
form assembly access" on page 49
Experience Series 700 Line Treadmills
"Hood Cover Replacement" on
"Trim Landing Covers Replacement" on
"Covers and Panels Replacement" on
procedure.
5 Replacement Procedures
Lift Platform Replacement
page 56.
"Side lift plat-
131