Precor Experience 700 line Series Service Manual page 111

3. Reinstall the fan grill onto the fan and secure with the four screw fasteners.
4. Reconnect the fan power cable and install the top cover onto the MC housing. Make
sure that the power cable is not pinched or damaged while snapping the top cover into
the housing tabs. Secure top cover using the one screw fastener.
5. Reinstall the Motor Controller, see
1
6. Plug in the power cord and switch the power ON.
1
Device power cord connector or electrical cable male connector that is inserted into an elec-
trical receptacle "outlet" (also called the plug-in).
"Motor Controller (MC) Replacement" on
5 Replacement Procedures
Motor Controller Fan Replacement
page 89.
Page 103