Precor Experience 700 line Series Service Manual page 75

4. Pull the cover away from the frame to release the cover tabs and remove.
5. Repeat the same removal procedure to remove both the left
cap covers.
Installation Instructions
Repeat procedure for both the left
1. Reinstall the end cap cover onto the end of the frame rail and press to lock cover tabs in
place. Secure using the three #3 Phillips screw fasteners. One fastener on the top, one
fastener on the end, and one fastener on the bottom.
2. Repeat procedure for both the left and right end cap covers.
3. Reinstall the left and right trim landing covers, see
on page 58.
4. Reinstall the hood cover, see
5. Repeat the same installation procedure to install both the left
cap covers.
and right covers.
"Hood Cover Replacement" on
5 Replacement Procedures
Covers and Panels Replacement
or right
"Covers and Panels Replacement"
page 60.
and right
trim end
trim end
Page 67