Precor Experience 700 line Series Service Manual page 204

Daily Task
Clean the running belt top sur-
face.
Clean between the running belt
and deck.
inspect the running belt operation
and condition.
Weekly Maintenance
Perform the following maintenance tasks every week.
WARNING: Remove power when performing tasks that require reaching under
raised decks or crossramps. Raised decks/crossramps can unexpected lower caus-
ing harm and personal injury to extremities.
Weekly Task
Do the Daily maintenance
tasks.
Switch machine
‡
Power OFF .
1
Disconnect a device power cord plug or cable connector from the power receptacle or outlet.
Unusual noises
l
Worn or frayed power cords.
l
Worn, damaged, missing safety lanyards or
l
clips.
Any other indication that the equipment may
l
be in need of service.
Important: If you determine that the equipment
needs service, disconnect all power connections
(television, Ethernet, and power) and move the
equipment away from the exercise area. Place an
"OUT OF SERVICE" sign on the equipment and
make it clear to all patrons and other users that they
must not use it.
Clean the top surface of the running belt with a soft
dry or damp cloth using an
Clean bettween the running belt and deck surface,
see Running Belt and Deck Cleaning
Inspect the running belt for the following possible
issues:
Belt slipping
l
Frayed or worn condition
l
Belt alignment and tracking is centered on the
l
deck and rollers
Do the Daily maintenance tasks in addition to the fol-
lowing Weekly maintenance tasks.
Raise the Incline to maximum level and then switch the
input power OFF and
Perform the following tasks with the power switch OFF,
7 Preventative Maintenance
Maintenance Schedule
Description
approved cleaner.
Procedure,
Description
1
unplug the power cord:
Page 196