5. Reinstall the Drive Roller, see
6. Reinstall the Take-up Roller, see
7. Center and square the running belt onto the Take-up and Drive rollers, tension the belt
to specification and verify the belt tracking, see
Adjustment" on
8. Reinstall the hood cover, see
left/right Landing Trim covers, see
9. Connect the power cord and switch the ON/OFF circuit breaker ON.
10. Do the Operation Verification tests (see
to service.
"Drive Roller Replacement" on
"Take-up Roller Replacement" on
page 43.
"Covers and Panels Replacement" on
"Covers and Panels Replacement" on
Running Belt and Deck Replacement Procedure
"Running Belt Tension and Tracking
"Operation Verification" on
5 Replacement Procedures
page 119.
page 124.
page 58, and
page 58.
page 16) and return
Page 134