Table of Contents
Advertisement
FAMILY
341
A prop holds lid in open position. Fixed-pane type
rear window with black rubber weatherstrip and
bright metal trim moulding.
Power plant recess with rear inspection lid fitted
with two catches and a prop holding the lid in
open position.
Sheet metal instrument panel lined with non-
reflective imitation leather lining; plastic support
for instrwnents; utility shelf under the instrument
panel, driver's side, lined with plastic material.
Adjustable sun visors, plastic laminate lined.
Tool kit and jack arranged behind spare wheel.
Front seat for two features separate cushions and
a single back rest; seat is imitation leather lined.
Intermediate seat for two is imitation leather lined
and metal framed. Bench-type seat is divided into
two sections, each reclinable forward.
Bench-type rear seat, accomodating three, is
imitation leather lined and metal framed.
Seat can
be collapsed on floor above engine compartment.
Black fluted rubber mats on floor and front
wheehouses.
Imitation leather lined masonite trim panels for
doors and body sides; imitation leather headlining.
Rear view mirrors: two outer on front quarter
doors and one inner. above windshield, with courtesy
light.
Fuel filler neck lid on right side panel, fitted with
key-type lock.
Fig. 557 - Front view of 850 Family.
Grabbing bar for intermediate row seat passen-
gers arranged behind front seat back rest.
Four ash receivers are located as follows: one
at center of dashboard, one on front seat back
rest, two on side panels at rear seat ends.
Fig. 558 - Interior view of 850 Family with one intermediate seat section in collapsed position.
Advertisement
Table of Contents
