Table of Contents
Advertisement
310
FIAT - 850 PASSENGER CARS
Fig. 512
&
Layout of instrument panel lining holding points.
Arrows evidence location of lining holding screws, nuts
and lugs.
Removing Instrument Panel Lining.
Take down instrument assembly as outlined on
page 308.
Remove lock nuts from wiper arm stroke adjust-
ing knob and instrument light dimming knob.
Remove cigar lighter.
Withdraw air outlets (3,
fig.
506) from instrument
panel.
Remove ash receiver and instrument panel rim
screw (fig. 512).
Remove utility drawer release pushbutton
(1,
fig. 513).
Remove the passenger grab handle (2, fig. 513)
as well as imitation wood lining screws. Withdraw
imitation wood lining.
Take out both interior lamps under instrument
panel.
Fig. 513· Detail showing the utility compartment in instrument
panel.
1. Release pushbutton with key Jock.• 2. Grab handle. - 3. Utility
drawer. - 4. Interior light.
Utility compartment and articulation system shown In figure
are the ea,ly design.
Fig. 514 • Close-up view of utility compartment.
1. Engine compartment lid release control. - 2. Utility drawe" drop type.
Back out instrument panel lining lock nuts and
screws (fig. 512) and pry up lining lugs.
Withdraw imitation leather lining assembly.
For installation, just reverse above outlined steps
using care to bend down imitation leather lining
lugs.
Luggage
Compartment Lid
Release
Control.
The front compartment lid release control (I,
fig. 514) is arranged in utility compartment interior.
For replacement of control cable just remove the
cable holding screws and disengage the lid catch
actuating rod (fig. 514).
Fig. 515 - Close-up view of engine compartment lid catch and
release control.
1.
Catch. - 2. Release rod. - 3. Catch mounting screw.
Advertisement
Table of Contents
