ROADSTER
305
Fig. 496 • Disassembling front corner parking and direction
signal lamp.
1. Lamp shell .• 2. lamp lens•• 3. Front corner direction signal
light bulb.
- the upward slanting (some 150) separation
lines start from the meeting points P of verticals
a-a with the horizontal line b-b (fig. 495) or just
outside of them.
A
maximum
outward shift of the meeting point P
(fig. 495) of 1'30'
(~5'/,'
- 130 rom), is permitted.
Front Corner Parking and Direction
Signal Lights.
To disassemble the front corner parking and
direction signal lamps just back out the screws
which secure the lens (2, fig. 496) and the lamp
shell (I) to the body.
Bulbs (3) are inserted by bayonet coupling.
Fig. 497 - Disassembling rear parking stop and direction signal
lamp.
1. lamp lens. - 2. Partition plate. - 3. Direction signal light bulb. -
4. Parking and stop light bulb.
Fig. 498 • Disassembling license plate lamp.
1. lamp shell. - 2. Screw, lamp shell·lo·bumper. - 3. License plate
light bulb. - 4. Bumper.
Rear Parking, Direction Signal and
Stop Lights with Reflector Lens.
The lamp is disassembled by removing the screws
securing the lens (I, fig. 497) and the screws secur-
ing the lamp shell to the body.
Bulbs (3 - 4) are inserted by bayonet coupling.
Fig. 499 - License plate lamp components.
1.
LIcense plate lamp bulb holder. - 2. LIcense plate lamp bulb. -
3. Lamp lens.