Table of Contents
Advertisement
BODY
251
Fig. 395 - Adjusting drop glass travel.
1. Window regulator cable. - 2. Cable stop plate. - 3. Glass boHom
channel. - 4. Glass pane.• 5. Buffer.
Thanks to this adjustment the drop glass can be
correctly cranked from the • closed
~
to the
f;
wide
open
It
position.
Check for the absence of drags from a tight front
run channel.
Fig. 396 - Interior view of door latch.
1. Door handle. - 2. Ends of rod 3. - 3.
latch
control rod. - 4. Lock
assembly. - 5. Door lock link. - 6. Remote control link.
Fig. 391 _ Door and window conlrols.
1.
Regulator. - 2. Regulator cable sheave. - 3. Regulator cable. -
4. Remote control. - 5. Door check strap.
Adjustment.
After the door has been assembled, adjust it
as follows.
The door must be perfectly aligned in door
opening. otherwise:
- scribe the outline of the hinge plates which
are secured to door pillar posts;
- using ram puller A. 81011 (fig. 398), loosen
hinge screws;
- reposition door as required; necessary move-
ment can be easily determined by comparing the
new position of hinges to scribe lines.
Fig. 398 • Door alignment.
1. Ram screwdriver A. 81011 .• 2. Door hinge screws.
Advertisement
Table of Contents
