Table of Contents
Advertisement
294
SEATS
.
ENGINE COMPARTMENT LID
FIAT· 850 PASSENGER CARS
BODY
page 294
»
295
Body differences from Sedan version are itemized
on page 269.
In this chapter are solely dealt with units involv-
ing particular directions for service.
For check of underbody use the same gauge
A. 14141 as recommended for the Sedan version.
SEATS
Remove seats as follows:
- pull front seat adjuster lever. unhook return
spring and slide off seats at front;
Fig. 414 - Removing rear seat cushion.
Fig. 415 - Removing rear seat back rest.
Arrows point to back rest holding screws.
Fig. 476 • Removing rear seat back rest.
1.
BacK rest. • 2. Back rest hooking strut. - 3. Back rest clamp.
- remove rear seat cushion seats
(fig. 474)
and
disengage the cushion from dowel pins on body
floor;
-
remove rear seat back rest lock screws at
bottom (fig. 475) and disengage the back rest from
hooking clamps welded to rear wall (fig. 476).
Fig. 417 - Front seat back rest catch device.
1. Catcn release button. - 2. Catch hook. - 3. Catch striker. - 4. Catch
mounting screws.
Advertisement
Table of Contents
