Customizing Your Telephone; Finding Out What A Button Does Using Button Inquiry - Nortel Modular ICS 6.0 Manual

Customizing your telephone

Finding out what a button does using Button Inquiry

You can use this feature to check the function of any line,
intercom, or programmed button on your telephone.
On the M7100 and the T7100 sets, Button Inquiry shows your
internal number followed by the function assigned to your
single memory button.
Displays
001 <LINENAME>
SHOW
123456789012345...
VIEW‚
221 <SETNAME>
VIEW‚
NEXT
<Feature name>
SHOW
Press a button
EXIT
For other displays, see Common feature displays on page 247.
P0992640 03
The display shows the number and name
OK
of the line. Press
redirection status of the line.
£
Press or press
view a number that is too long to fit on the
display. Press
done.
The display shows the directory number of
the telephone, and the assigned name.
NEXT
Press
to ring at the intercom button.
The name of the feature assigned to a
OK
button is displayed when you press the
button. Press
information.
Press the button you want to check. Press
²
or EXIT when you are finished.
² ¥ â
SHOW
to view the
VIEW‚ ·VIEW
or
³
OK
or when you are
to see the first line assigned
£
or SHOW for additional
Modular ICS 6.0 System Coordinator Guide
t o