An Example Of How To Turn On A Service Manually - Nortel Modular ICS 6.0 Manual

4. Press ≠ at Services.
5. Press ' until you see the Service you want to
program.
6. Press ≠ and ' until you see the
schedule you want to program.
7. Press ≠ and use CHANGE to select the setting that
works best for your office: Off, Manual or Automatic.
Each schedule can have its own configuration of a Service
which works independently of automatic start and stop times.
For example, there may be a version of Restriction service
called Night Schedule that prevents anyone from making long
distance calls. But calling it Night Schedule does not mean it
can only be used with a schedule. You can turn the Night
Schedule for Restriction Service on or off as needed any time
of the day or night. If you decide to run a service on a schedule,
the system uses the start and stop times used for that schedule.

An example of how to turn on a Service manually

You may have Ringing service, as your night service, set up to
run according to the Night Schedule. You may decide you
want that ringing arrangement to come into effect only when it
is turned on and off manually.
You need the programming template found at the front of this
guide. See Getting started with Norstar on page 13 for more
information.
² ¥ ¥ Û ß ß Ü Ý Ý
1. Press
Û Ü ß Ý ß
2. Press
password).
3. Press ' twice.
P0992640 03
Using System features / 209
.
(the default System Coordinator
Modular ICS 6.0 System Coordinator Guide