Making calls
There are many ways to make a call, depending on the
programming and the type of call, as follows:
•
Pick up the receiver and dial. The Norstar system supports
three methods of dialing. See Changing how you dial your
calls on page 73.
•
Pick up the receiver, press a line button, and dial (if the call
is not on your prime line).
•
Press the button labeled Handsfree/mute and dial to talk
without using the receiver. See Using Handsfree/Mute on
page 61.
•
Press the button labeled Handsfree/mute, then press a line
button, and dial to talk without the receiver if the call is not
on your prime line.
•
Press a line button and dial to talk without the receiver if
Automatic Handsfree is assigned to your telephone.
Use one of the features that make dialing easier. See Time
•
savers for making calls on page 79.
Displays
221 busy
PRIORITY
9__
QUIT
BKSP
95551234
P0992640 03
The telephone you have called has no
LATER
internal lines available. Press
the Ring Again or Message features or press
PRIORITY
Ã
You are dialing using Pre-dial. To erase an
incorrect digit, press the left end of
complete, select a line or lift the receiver.
This prompt remains on your display as long
TRANSFER
as you are on a call you have dialed. To
transfer the call, press
LATER
to make a priority call.
or
BKSP
. When the number is
TRANSFER
Modular ICS 6.0 System Coordinator Guide
to use
.