Using Special Telephones; Direct-Dial; Changing The Direct-Dial Telephone Assignments - Nortel Modular ICS 6.0 Manual

218 / Using System features

Using special telephones

Direct-dial

You can reach the direct-dial telephone by dialing a single
digit. The direct-dial telephone is usually in a central location,
such as at the desk of an administrative assistant or attendant.
You can have up to five direct-dial telephones for your Norstar
system. It is usually the prime telephone or the central
answering position (CAP).
The direct-dial telephone can send up to 30 messages and can
invoke Services to activate the extra-dial telephone.
You cannot forward calls to a direct-dial telephone that is
outside your Norstar system. See Making changes to Call
Forward No Answer on page 36.
Note: ISDN terminals cannot use the Direct-Dial digit to
reach a Direct-Dial set.

Changing the direct-dial telephone assignments

Your installer or customer service representative sets up the
direct-dial telephone.
You can change which direct-dial telephone a telephone is
assigned to, or assign it no direct-dial telephone.
You need the programming template found at the front of this
guide. See Getting started with Norstar on page 13 for more
information.
² ¥ ¥ Û ß ß Ü Ý Ý
1. Press
Û Ü ß Ý ß
2. Press
password).
3. Press ≠ at Terminals&Sets.
Modular ICS 6.0 System Coordinator Guide
.
(the default System Coordinator
P0992640 03