Table of Contents
Advertisement
180 / Using the Hospitality features
Using the room/set programming
This section describes how the room occupancy and room
condition settings are used.
Setting dialing filters by room state
1. Press
² ¡ à á .
2. Enter the Desk admin password if you are prompted for a
password.
The set displays: Oc of rm#::
3. Enter the room number and press OK.
The set displays rrrrr:Vacant.
4. Press the CHANGE display key and select the required status
for the room set.
5. To program other rooms, press the FIND or NEXT display
key and return to step 3.
¨
6. Press
Note: Setting the room state to Vacant cancels any outstanding
alarms.
Setting the room condition
You can use this feature on a room set or administration set to:
•
set the room state to service done (Srvc done)
•
set the room state to Needs service (Needs srvc)
•
query the state of the room
Modular ICS 6.0 System Coordinator Guide
to exit.
P0992640 03
Advertisement
Table of Contents
