Table of Contents
Advertisement
48 / Answering calls
automatically. You can program features onto CAP module
buttons. See Time savers for making calls on page 79 and
Customizing your telephone on page 137 for information on
programming memory buttons.
Buttons on a CAP module cannot be assigned as answer
buttons.
Monitoring telephones with the CAP module
The indicators ˆ beside internal autodial buttons on your CAP
module show the status of Norstar telephones.
The indicator is on when the telephone has:
•
an active call
•
Do Not Disturb turned on
The indicator is off when a telephone has:
•
no active call
•
a call on hold and no other active call
Tip -
Release button
¨
Pressing
¨
down.
While you are on a call, do not press
are using. If you do, you disconnect the call. Use
Modular ICS 6.0 System Coordinator Guide
You can send up to 30 messages from a CAP.
ends a call. You do not have to put the receiver
also ends feature programming.
¨
to end a feature you
²
instead.
P0992640 03
Advertisement
Table of Contents
