An Example Of How To Turn On A Service Manually; Turning Services On And Off Using Feature Codes - Nortel ICS 6.1 Manual

you decide to run a service on a schedule, the system uses the start and stop
times used for that schedule.

An example of how to turn on a Service manually

You may have Ringing service (your night service) set up to run according
to the Night Schedule. You may decide you want that ringing arrangement
to come into effect only when it is turned on and off manually.
You need the programming template found at the front of this guide. See
''Getting started with Norstar'' on page 15 for more information.
²
1. Press
Û Ü ß Ý ß
2. Press
3. Press
4. Press
5. Press
6. Press
Night Schedule for Ringing Service no longer follows the schedule but can
be turned on and off by using the feature code and selecting Night Ringing.
See ''Turning Services on and off using feature codes'' on page 221.

Turning Services on and off using feature codes

The master control for services is in programming. See ''Turning Services
on and off'' on page 220. Day-to-day use of Services is controlled using the
following feature codes.
²
¡ à Ú
² £ ¡ à Ú
² ¡ à Û
² £ ¡ à Û
² ¡ à Ü
² £ ¡ à Ü
P0603544 02
¥ ¥ Û ß ß Ü Ý Ý
(the default System Coordinator password).
twice.
.
. The display reads
and use
Turns on Ringing service. When used at the direct-
dial telephone, it activates the alternate direct-dial
telephone (extra-dial telephone).
Turns off Ringing service.
Turns on Restriction service.
Turns off Restriction service.
Turns on Routing service.
Turns off Routing service.
Using System features / 221
.
displays
displays.
.
to set the Service to
Compact ICS 6.1 System Coordinator Guide
.