To enter a new time, repeat the above steps and enter a new
time. This overwrites the existing entry.
Canceling an alarm
Canceling the alarm time for any set cancels the alarm time for
all the sets in the same room.
Digital set: Press
Analog set: Press ˚
Turning off an alarm
When the alarm rings, the user can release the ring by doing
one of the following, depending on the type of set in the room:
Digital set: Press any button except
Analog set: Lift and replace the handset.
³
a cts like a snooze alarm and will temporarily disable the
alarm for a programmed period. Refer to Service times on page
179.
If the user is on a call when the alarm sounds, they can press
any button except
P0992640 03
Using the Hospitality features / 185
² £ ¡ à Þ .
£
¡ à Þ .
which would release the call instead.
¨ ,
³
.
Modular ICS 6.0 System Coordinator Guide