Table of Contents
Advertisement
224 / Using System features
If your Norstar system is connected to a private branch
exchange (PBX), you can use a Link signal to access special
features. On some telephones, Link is called FLASH.
The Link signal can be included as part of a longer stored
sequence on an external autodial button or in a speed dial code.
The Link symbol (¤) uses two of the 24 spaces in a dialing
sequence.
Preventing a telephone from using Link
Link can be restricted at individual telephones. You need the
programming template found at the front of this guide. See
Getting started with Norstar on page 13 for more information.
² ¥ ¥ Û ß ß Ü Ý Ý
1. Press
Û Ü ß Ý ß
2. Press
password).
3. Press ≠ and enter the internal number of the
telephone you want to program.
4. Press ≠.
5. Press ' three times. The display reads
Restrictions.
6. Press ≠ twice.
7. Press ' three times. The display reads Allow
link:.
8. Press CHANGE to choose Y (Yes) or N (No).
Tip -
exchange (PBX), program Link onto a memory button for one-
touch access.
Modular ICS 6.0 System Coordinator Guide
(the default System Coordinator
If your Norstar system is connected to a private branch
.
P0992640 03
Advertisement
Table of Contents
