Changing Call Log Options; Changing How Calls Are Dialed - Nortel Modular ICS 6.0 Manual

158 / User Preferences
5. Press CHANGE and enter the telephone number the same
way you would dial it on the telephone.
6. Press OK.
7. Press ' and choose the line (or enter a code for a
line pool) the speed dial code should use.
Use the line pool code to select a particular line pool for use
with Speed Dial. If you select Use routing tbl, a line or pool
is chosen by the routing programming according to the initial
digits in the number.
The route you choose for a User Speed Dial code must be one
that the telephone can use. For example, if the telephone does
not have access to Line Pool B and you use that pool code with
the speed dial code, the code does not work.
To change a system speed dial code, see Adding or changing
a system speed dial on page 31.

Changing Call Log options

1. Press ≠ at Call log opt'ns....
2. Press CHANGE until you see the option you want to use. See
Call Log options on page 130.

Changing how calls are dialed

1. Press ≠ at Dialing opt'ns....
2. Press CHANGE until you see the option you want to use.
Descriptions for dialing options are found on the Telephone
Feature Card, or see Changing how you dial your calls on
page 73.
Modular ICS 6.0 System Coordinator Guide P0992640 03