208 / Using System features
Changing the lines used by outgoing calls
Routing service allows you to assign alternate routes to calls.
In this way you can take advantage of lower costs available on
particular routes on certain days and at certain times. Both the
regular and alternate routes are programmed by your installer
or customer service representative.
Turning Services on and off
The master control for how different services and their
schedules are used by your system is in programming. There
are three settings: Manual, Automatic and Off.
•
Manual allows you to turn the service on and off at any
time from a control telephone using a feature code.
•
Automatic allows you to use the preassigned stop and start
time for a service. You are able to start and stop the service
by entering the appropriate feature code at a control
telephone. If you select this setting, you use the start and
stop times programmed by your installer or customer
service representative.
•
Off prevents the service from being activated.
In the case of restriction settings and routing, this means
that the Normal schedule will be in effect.
You need the programming template found at the front of this
guide. See Getting started with Norstar on page 13 for more
information.
² ¥ ¥ Û ß ß Ü Ý Ý
1. Press
Û Ü ß Ý ß
2. Press
password).
3. Press ' twice.
Modular ICS 6.0 System Coordinator Guide
.
(the default System Coordinator
P0992640 03