Routing And Control Board Functions; Routing And Control Board Components; Rcb Front Panel - Juniper MX10003 Hardware Manual

CAUTION:
replacement or blank panel to install.
The MX10003 router supports the following RCBs:
JNP10003-RE1
JNP10003-RE1-LT
This topic covers:

Routing and Control Board Functions

The Routing and Control Board integrates the Routing Engine and Control Board functions into a single
management unit. Each RCB provides all the functions needed to manage the operation of the modular
chassis:
System control functions such as environmental monitoring
Routing Layer 2 and Layer 3 protocols
Communication to all components such as line cards, power, and cooling
Transparent clocking
Alarm and logging functions

Routing and Control Board Components

Each RCB consists of the following internal components:
High-performance 1.6-GHz Intel 8 Core X86 CPU
64-GB DDR4 RAM
100-GB SATA SSD

RCB Front Panel

Figure 16 on page 49 shows the front panel of the MX10003 RCB (model number: JNP10003-RE1).
If one of the RCBs fails, do not remove the failed RCB until you have a
48