Honda Hawk GT NT650 1988 Service Manual page 72

REED VALVE INSPECTION
Disconnect the air supply hoses from the reed valve covers of
the ASV.
Disconnect the vacuum tube and air intake hose from the
ASV.
Remove the ASV mounting bolts and ASV.
Remove the two screws, the reed valve cover and the reed
valve from the ASV.
Check the reed valve for damage or fatigue, and replace if nec-
essary.
Install a new reed valve if the seat rubber is cracked or dam-
aged, or if there is clearance between the reed valve and seat.
CAUTION
Do not disassemble the reed valve assembly or bend the reed
stopper.
• If the stopper, reed or seat is faulty, replace the valve as an as-
sembly.
Assemble and install the ASV in the reverse order of disassem-
blylremoval.
NOTE
• After installing, make sure the air and vacuum tubes are
correctly connected (page 1-10 to 15.).
FUEL SYSTEM
(2) REED VALVE
(3)
REED
(4)
REED STOPPER
4-19