Honda Hawk GT NT650 1988 Service Manual page 30

LUBRICATION
Remove the oil strainer and oil pipe from the oil pump.
(1) OIL STRAINER
Check the a-rings and oil seal for fatigue or damage.
Clean the oil strainer and oil pipe with non-flammable or high
flash point solvent.
(1)
OIL SEAL
Remove the three cover bolts.
Disassemble the parts and clean them with non-flammable or
high flash point solvent.
INSPECTION
Install the outer and inner rotors to the pump body.
Measure the outer rotor-to-pump body clearance.
SERVICE LIMIT: 0.35 mm (0.014 in)
2-6
(1)
COVER SaLTS