Honda Hawk GT NT650 1988 Service Manual page 148

'88, After '88:
Install the rear cam chain drive sprocket over the crankshaft,
aligning the extra-wide splines in the sprocket and crankshaft.
Install the rear cam chain over the drive sprocket.
Install the oil pipe stay and cam chain tensioner set plate.
Tighten the bolt sercurely.
Install the front cam chain over the front cam chain drive
sprocket.
Install the cam chain tensioner set plate and tighten the bolt
securely.
Install the remaining parts in the reverse order of removal
(page 11-3).
CRANKSHAFT/TRANSMISSION
11-17