SEAT
REMOVAL/INSTALLATION
Insert the ignition key into the helmet holder and turn it cloc-
kwise.
Pull the holder hook down to release the seat lock.
Remove the seat from the frame.
Installation is the reverse order of removal.
NOTE
•
Apply clean grease to the seat lock striker and latch.
(2) HOLDER HOOK
REAR WHEEL/SUSPENSION
REAR COWLI NG
REMOVAL/INSTALLATION
Remove the seat.
Disconnect the tail/brake and turn signal light wire harnesses
connectors.
Remove the four rear cowling mounting bolts and the cowling.
Installation is the reverse order of removal.
13-25