Honda Hawk GT NT650 1988 Service Manual page 232

ELECTRIC STARTER
ASSEMBLY
(2) CASE
<.
(4)
SHIMS
(7)
a-RING
(1) FRONT COVER
(5)
BRUSH HOLDER
(4)
SHIMS
~?~
(4) SHIMS
(10) CABLE TERMINAL AND BRUSHES
(9) REAR COVER
Set the brushes on the brush holder.
Align the starter motor case notch with the brush holder tab.
Install the armature in the case.
Set the brush springs.
Install the rear shims in the same location and number as
before disassembly.
Install the a-ring on the case.
Install the rear cover, aligning its slot with the brush holder pin.
17-5