Honda Hawk GT NT650 1988 Service Manual page 58

CARBURETOR REMOVAL
_L--- _
Gasoline is extremely flammable and is explosive under certain
conditions. Work in a well ventilated area with the engine
stopped. Do not smoke or allow flames or sparks in the work
area or where gasoline is stored.
Loosen the drain screws and drain the fuel into a container.
Remove the air cleaner case.
Disconnect the throttle cables from the carburetor.
NOTE
Turn the choke lever fully in to avoid losing the choke
valves.
Remove the choke valves from the carburetor and loosen the
carburetor insulator bands.
California model only:
Disconnect the purge control valve No. 5 tubes and air vent
control valve No.6 and 11 tubes from the carburetor.
Pull the carburetors upward and away from the engine.
CARBURETOR DISASSEMBLY
NOTE
The carburetors can be disassembled without being sepa-
rated.
Remove the fuel tube from the carburetor.
VACUUM CHAMBER
Remove the four screws and vacuum chamber cover.
FUEL SYSTEM
(3) THROTTE CABLES
4-5