Honda Hawk GT NT650 1988 Service Manual page 182

REAR WHEEL/SUSPENSION
DISASSEMBLY
Make sure the spring adjuster is set to the softest position
before disassembly.
Set the shock absorber in the hydraulic press with the special
tool.
TOOL:
Shock absorber compressor attachement 07967 - KE 10000
Compress the spring until the stop ring can be removed, and
remove the stop ring from the shock absorber.
(1) SHOCK ABSORBER
COMPRESSOR
ATTACHMENT
(10) UPPER SPRING SEAT
jl
LOWER JOINT
(3) SPRING GUIDE
(2) SPRING
(1) LOWER SPRING SEAT
(11) STOP RING
(12) DAMPER-_ _
~
Remove the following:
- upper spring seat
- spring
- lower spring seat
- spring adjuster
- dust seal
- lock nut and lower joint
- stop rubber
- seat
INSPECTION
Inspect the following parts:
- damper unit for oil leaks
- damper rod for bends or damage
- stop rubber for wear or damage
Inspect all the other parts for wear or damage.
Measure the spring free length.
SERVICE LIMIT: 148.3 mm (5.84 in)
(1) SPRING
13-15