Honda Hawk GT NT650 1988 Service Manual page 175

REAR WHEEL/SUSPENSION
INSPECTION
Bearing
Turn the inner races of the ball bearings with your finger.
The bearing should turn smoothly and quietly.
Also check that the bearing outer races fits tightly in the
eccentric bearing carrier.
Check the right bearing needle rollers for obvious signs of
wear.
Remove and discard the ball bearings if they do not turn
smoothly, quietly, or if they fit loosely in the eccentric bearing
carrier (page 13-9).
NOTE
• Replace the bearings in pairs.
Replace the needle bearing if it is damaged.
(5) ECCENTRIC BEARING
CARRIER
Damper
Separate the driven flange cover with the sprocket from the
flange.
Check the driven flange damper for damage.
Replace the dampers if necessary.
(2) FLANGE COVER
(1) FLANGE BEARING
(4) DAMPER
13-8
(1) BEARING
(3) DRIVEN FLANGE